design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fp C eee-47 C ' 1 k capacitance (f) series identi?cation lot number negative polarity marking (C) rated voltage mark mark for lead-free products black dot (square) a0.2 w ( ) reference size l 0 d0.5 h b0.2 (i) k (p) (i) + C 0.3 max. pressure relief ( 0 10 and larger) features low esr (30 % to 50 % less than fk series) endurance: 2000 h at 105 c vibration-proof product is available upon request. ( 0 8 mm and larger) aec-q200 quali? ed ? rohs directive compliant surface mount type series: fp type: v fp high temperature lead-free refl ow (suffi x:a ? ) specifi cations di men sions in mm(not to scale) marking example:6.3 v 22 f marking color: black category temp. range C55 c to +105 c rated w.v. range 6.3 v.dc to 50 v.dc nominal cap. range 10 f to 1800 f capacitance tolerance 20 % (120 hz/+20 c) dc leakage cur rent i < 0.01 cv or 3 (a) after 2 minutes (whichever is greater) tan d please see the attached standard products list characteristics at low temperature w.v. (v) 6.3 10 16 25 35 50 (impedance ratio at 120 hz) z(C25 c)/z(+20 c) 222222 z(C40c)/z(+20 c) 333333 z(C55c)/z(+20 c) 444333 endurance after applying rated working voltage at +105 c 2 c for 2000 hours the capacitors shall meet the limits speci? ed below. post-test requirement at +20 c capacitance change 30 % of initial measured value tan d < 200 % of initial speci? ed value dc leakege current < initial speci? ed value shelf life after storage for 1000 hours at +105 c2 c with no voltage applied and then being stabilized at +20 c, capacitors shall meet the limits speci? ed in endurance. (with voltage treatment) resistance to soldering heat after re? ow soldering and then being stabilized at +20 c, capacitors shall meet the following limits. capacitance change 10 % of initial measured value tan d < initial speci? ed value dc leakage current < initial speci? ed value size code d l a, b h i w p k b 4.0 5.80.30 4.3 5.5 max. 1.8 0.650.1 1.0 0.35 - 0.20 c 5.0 5.80.30 5.3 6.5 max. 2.2 0.650.1 1.5 0.35 - 0.20 d 6.3 5.80.30 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 - 0.20 d8 6.3 7.70.30 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 - 0.20 e 8.0 6.20.30 8.3 9.5 max. 3.4 0.650.1 2.2 0.35 - 0.20 f 8.0 10.20.30 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.20 g 10.0 10.20.30 10.3 12.0 max. 3.5 0.900.2 4.6 0.700.20 + 0.15 + 0.15 + 0.15 + 0.15 + 0.15 cap (f) frequency (hz) 120 1 k 10 k 100 k to 10 to 470 0.65 0.85 0.95 1.00 560 to 1800 0.75 0.90 0.95 1.00 frequency correction factor for ripple current (unit : mm) j 6.3 v a 10 v c 16 v rated voltage mark e 25 v v 35 v h 50 v ? this product qualify for aec-q200, but it has some deviations. 01 mar. 2014
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fp C eee-48 C standard products w.v. cap. (20 %) case size speci? cation part no. (rohs:compliant) re? ow min. packaging q'ty dia. length ? size code ripple current (100 khz) (+105 c) e.s.r. (100 khz) (+20 c) tan d (120 hz) (+20 c) taping (v) (f) (mm) (mm) (ma r.m.s.) ( )(pcs) 6.3 22 4 5.8 b 160 0.85 0.26 eeefp0j220ar (5) 2000 47 4 5.8 (b) 160 0.85 0.26 eeefpj470uar (5) 2000 5 5.8 c 240 0.36 0.26 eeefp0j470ar (5) 1000 100 5 5.8 (c) 240 0.36 0.26 eeefpj101uar (5) 1000 6.3 5.8 d 300 0.26 0.26 eeefp0j101ap (5) 1000 220 6.3 5.8 d 300 0.26 0.26 eeefp0j221ap (5) 1000 330 6.3 7.7 d8 600 0.16 0.26 eeefpj331xap (5) 900 8 6.2 e 500 0.18 0.26 eeefp0j331ap (6) 1000 470 8 10.2 f 850 0.08 0.26 eeefp0j471ap (6) 500 1000 8 10.2 f 850 0.08 0.26 eeefp0j102ap (6) 500 1500 10 10.2 g 1190 0.06 0.26 eeefp0j152ap (6) 500 1800 10 10.2 (g) 850 0.08 0.26 eeefpj182uap (6) 500 10 22 4 5.8 b 160 0.85 0.19 eeefp1a220ar (5) 2000 33 4 5.8 (b) 160 0.85 0.19 eeefpa330uar (5) 2000 5 5.8 c 240 0.36 0.19 eeefp1a330ar (5) 1000 150 6.3 5.8 d 300 0.26 0.19 eeefp1a151ap (5) 1000 220 6 . 3 7.7 d 8 6 0 0 0.16 0.19 eeefpa221xap (5) 900 8 6.2 e 500 0.18 0.19 eeefp1a221ap (6) 1000 330 8 10.2 f 850 0.08 0.19 eeefp1a331ap (6) 500 470 8 10.2 f 850 0.08 0.19 eeefp1a471ap (6) 500 680 8 10.2 f 850 0.08 0.19 eeefp1a681ap (6) 500 1000 10 10.2 g 1190 0.06 0.19 eeefp1a102ap (6) 500 1200 10 10.2 (g) 850 0.08 0.19 eeefpa122uap (6) 500 16 10 4 5.8 b 160 0.85 0.16 eeefp1c100ar (5) 2000 22 4 5.8 (b) 160 0.85 0.16 eeefpc220uar (5) 2000 5 5.8 c 240 0.36 0.16 eeefp1c220ar (5) 1000 47 5 5.8 (c) 240 0.36 0.16 eeefpc470uar (5) 1000 6.3 5.8 d 300 0.26 0.16 eeefp1c470ap (5) 1000 68 6.3 5.8 d 300 0.26 0.16 eeefp1c680ap (5) 1000 100 6.3 5.8 d 300 0.26 0.16 eeefp1c101ap (5) 1000 6 . 3 7.7 d 8 6 0 0 0.16 0.16 eeefpc101xap (5) 900 15 0 6 . 3 7.7 d 8 6 0 0 0.16 0.16 eeefpc151xap (5) 900 220 6 . 3 7.7 d 8 6 0 0 0.16 0.16 eeefpc221xap (5) 900 8 6.2 e 500 0.18 0.16 eeefp1c221ap (6) 1000 330 8 10.2 f 850 0.08 0.16 eeefp1c331ap (6) 500 470 8 10.2 f 850 0.08 0.16 eeefp1c471ap (6) 500 680 10 10.2 g 1190 0.06 0.16 eeefp1c681ap (6) 500 820 10 10.2 (g) 850 0.08 0.16 eeefpc821uap (6) 500 25 10 4 5.8 b 160 0.85 0.14 eeefp1e100ar (5) 2000 22 5 5.8 c 240 0.36 0.14 eeefp1e220ar (5) 1000 33 5 5.8 (c) 240 0.36 0.14 eeefpe330uar (5) 1000 6.3 5.8 d 300 0.26 0.14 eeefp1e330ap (5) 1000 47 6.3 5.8 d 300 0.26 0.14 eeefp1e470ap (5) 1000 68 6.3 5.8 d 300 0.26 0.14 eeefp1e680ap (5) 1000 100 6 . 3 7.7 d 8 6 0 0 0.16 0.14 eeefpe101xap (5) 900 8 6.2 e 500 0.18 0.14 eeefp1e101ap (6) 1000 150 8 10.2 f 850 0.08 0.14 eeefp1e151ap (6) 500 220 8 10.2 f 850 0.08 0.14 eeefp1e221ap (6) 500 330 8 10.2 f 850 0.08 0.14 eeefp1e331ap (6) 500 470 10 10.2 g 1190 0.06 0.14 eeefp1e471ap (6) 500 560 10 10.2 (g) 850 0.08 0.14 eeefpe561uap (6) 500 ? size code( ):miniaturization product if part number exceeds 12 digits, voltage code is abbreviated as follows; 0j j, 1a a, 1c c, 1e e, 1v v please refer to the page of re? ow pro? le and the taping dimensions. when requesting vibration-proof product, please put the last v instead to p endurance : 105 c 2000 h 01 mar. 2014
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fp C eee-49 C standard products ? size code( ):miniaturization product if part number exceeds 12 digits, voltage code is abbreviated as follows; 0j j, 1a a, 1c c, 1e e, 1v v please refer to the page of re? ow pro? le and the taping dimensions. when requesting vibration-proof product, please put the last v instead to p w.v. cap. (20 %) case size speci? cation part no. (rohs:compliant) re? ow min. packaging q'ty dia. length ? size code ripple current (100 khz) (+105 c) e.s.r. (100 khz) (+20 c) tan d (120 hz) (+20 c) taping (v) (f) (mm) (mm) (ma r.m.s.) ( )(pcs) 35 10 4 5.8 (b) 160 0.85 0.12 eeefpv100uar (5) 2000 22 5 5.8 c 240 0.36 0.12 eeefp1v220ar (5) 1000 33 6.3 5.8 d 300 0.26 0.12 eeefp1v330ap (5) 1000 47 6.3 5.8 d 300 0.26 0.12 eeefp1v470ap (5) 1000 6 8 6 . 3 7.7 d 8 6 0 0 0.16 0.12 eeefpv680xap (5) 900 100 6 . 3 7.7 d 8 6 0 0 0.16 0.12 eeefpv101xap (5) 900 8 10.2 f 850 0.08 0.12 eeefp1v101ap (6) 500 150 8 10.2 f 850 0.08 0.12 eeefp1v151ap (6) 500 220 8 10.2 f 850 0.08 0.12 eeefp1v221ap (6) 500 330 10 10.2 g 1190 0.06 0.12 eeefp1v331ap (6) 500 390 10 10.2 (g) 850 0.08 0.12 eeefpv391uap (6) 500 50 10 0 8 10. 2 f 670 0.18 0.10 eeefp1h101ap (6) 500 220 10 10.2 g 900 0.12 0.10 eeefp1h221ap (6) 500 endurance : 105 c 2000 h 01 mar. 2014
|
